Welcome to Hanna Instruments United Kingdom
Telephone : 01525 850855 Fax : 01525 853668 Email : firstname.lastname@example.org
Basket Total : £0.00(0)
Click the product to find out more
84uS conductivity calibration solution is the one to use if you are measuring in low conductivity waters such as spring water.
12.41ppt conductivity/TDS calibration solution in a choice of 500 or 230ml bottle sizes.
1413uS/cm conductivity calibration solution is the most commonly used calibration solution for conductivity meters.
Conductivity Solution 5 000uS in 500ml or 230ml bottles.
12,880uS/cm conductivity calibration solution.
80,000uS conductivity calibration solution.
111,800uS conductivity solution in 230ml or 500ml bottle sizes.
Hanna 80000 ┬ÁS/cm calibration solution is needed for the proper calibration of instrumentation used to measure high conductivity samples, such as very dirty wastewater, solutions with suspended materials and plating baths.
The 1413 ┬ÁS/cm solution is the one best suited for general use. This solution is also available in combination kits with the pH 7 buffer for the easy calibration of multiparameter instruments. It is also available in different sized bottles and in si
The 12880 ┬ÁS/cm calibration solution is widely used to assure the proper performance of conductivity meters with a scale higher than 10 mS.cm.
Activation Solution for HI-83900 Lysimeter (500ml).
Single bottle LiCl salt 15 gm.
Select two products & click 'Continue' to compare them side by side.
© Copyright 2010 Hanna Instruments Ltd. All rights reserved.